The advantages of ceramsite sand square swing screen compared to other screening machines
The ceramsite sand square oscillating screen will cause heat and friction during the entire screening process, and the sealing tape will deform or crack after a period of application. When the vibrating screen is used, it is necessary to regularly maintain whether the sealing tape is damaged or not. If it is found, it should be dismantled and replaced immediately to prevent the phenomenon of running out of materials. 1. Inspect the tightness level of the rocking screen frame and the screen body for mining.
The ceramsite sand square swing screen is a special vibrating screen designed for high-volume and high-density screening. Its structure includes a 12 inch mm square frame to accommodate interchangeable screens and a chassis. The handle is installed on the collector with a rocker. There are many types of screening equipment in the industry. For example, the equipment we often see includes linear vibrating screens and some special-purpose screening equipment, such as large swing screens.
The ceramsite sand square rocking screen is the fixed anchor bolt of the vibrating motor support grate plate and needs to be tightened again. Check whether the rotation directions of the two vibration motors are reversed. As the direction of rotation is the same, the wiring of one motor should be changed so that the rotation directions of the two vibration motors are opposite. The correct operation and maintenance of the stainless steel swing screen has a great impact on the service life of the equipment, so how much do you know about the operation and maintenance of this type of equipment?
The ceramsite sand square swing screen screens materials below 500 meshes for screening work, and compared with ordinary screening equipment, it has up to 5 times the output per unit area, and can screen accurately to 6 levels.
For the same board, if the thickness is different and the elements contained in it are different, the price will also be different. Reliable vibrating screen manufacturers use carbon steel with a thickness of 5 mm and a stainless steel plate of 3 mm. The content of the element is also one of the many factors in the decision-making. Although some boards look the same on the surface, the specific element content is very low, so customers should pay attention to this when choosing.
The ceramsite sand square swing screen is a device attached to some machinery and equipment to generate excitation force, and it is an important part of using mechanical vibration. There will be some problems during the operation of the swing screen. Regular inspections including weekly and monthly inspections should be carried out during use. According to the results of the weekly and monthly inspections, determine whether the swing screen has failed. If it fails, repair it in time. The editor will focus on explaining what to do if there are fringing lines on the vibrator of the swing screen.