Reasons and solutions for the frequent disconnection of the chain of the chain hoist
Bucket elevators are roughly divided into belt type, chain type, and plate chain type. Now let’s talk about the reason for the chain break of the chain bucket elevator: this is related to the conveyed material. If the conveyed material has fine particles and large viscosity, it is easy Glue between two links. If this fine particle layer is glued between every two adjacent links, thousands of links will accumulate to a very large length, making the chain more and more tighter until it is broken. . The solution is to gradually loosen the tensioning device of the chain to relieve the excessive tension so that the chain will not break.
1. The quality of the chain itself, such as high hardness and reduced toughness during heat treatment.
2. The upper and lower sprockets are misaligned and bite the chain
3 Whether the self-made roller used for the next round
4. After the chain is worn out, the movement is restricted. When the upper and lower sprocket is bitten, the hopper hole wears and tears will also cause the chain to be broken. The above are several points that are often encountered during work.