The solution to reduce the operating cost of the reformation of the square swing screen
When changing the screen of the square swing screen, pay attention to what kind of screen to choose which has a long life and is not easy to be damaged. In fact, those who often use vibrating screen equipment know that the screen is a vulnerable part and needs to be replaced frequently, some even once every 2-3 days, but some customers actually use the screen for a long time, and the selection of the screen is very long. The essential.
The purchase of vibrating screen equipment cannot be cheap, because cheap screens are not durable. On the one hand, cheap screens have inaccurate meshes. Inaccurate meshes can lead to different product strengths. The purpose of using vibrating screens is If you separate the particles by size, you will not be able to achieve this goal with a cheap sieve. Therefore, when we choose a screen, we must choose the above-required conditions for selection.
The square rocking screen must have the same warp and weft weaving strength, and it can be pulled down by hand without shaking; the screen is knotted on both sides, such a screen is not easy to be detached due to the vibration of the vibrating screen equipment; choose the vibration with a large diameter Screening equipment screen; choose the standard aperture. The test results of the high-frequency vibrating screen show that the material collected at the medium discharge port still contains a lot of large grains, indicating that the desired result has not been achieved. Some of the gates, the screen grid and the screen grid in the high-frequency vibrating screen The tightness between the rooms is the key to improve the efficiency of classification.
The square swing screen is a one-time punching output test to test the production capacity of the high-frequency vibrating screen. The test results show that the classification efficiency of the high-frequency vibrating screen at 25t/h output is only slightly lower than that at 20t/h, and the classification requirements should also be met after appropriate adjustments to the model of the high-frequency vibrating screen.