Matters needing attention when choosing the model of bucket chain elevator
The component dimensions of the bucket chain hoist include the width of the conveyor belt, the width of the slat, the volume of the hopper, the diameter of the pipe, and the size of the container. The size of these components directly affects the conveying capacity of the screw feeder. Due to different materials to be conveyed, the main parameters are generally determined according to the requirements of the material handling system, the various premises of the material loading and unloading location, the relevant production process and the characteristics of the material. The following is a single introduction to the items that should be paid attention to when selecting the bucket chain hoist.
Conveying speed of bucket chain hoist: Increasing the conveying speed can increase the conveying capacity. When the conveyor belt is used as the traction part and the conveying length is large, the conveying speed is increasing day by day. For conveyors that use chains as traction parts, the conveying speed should not be too high to prevent increasing the dynamic load. At the same time, the conveying speed of the feeder for process control should be determined according to the production process requirements. Conveying length and inclination angle: The length and inclination angle of the conveying line directly affect the total resistance of the conveyor and the required power. Now there are many types of conveyors, some with direct parallel feeding, and some with a certain inclination angle, so these conditions of use should be explained when selecting the screw feeder.
The conveying capacity of the bucket chain hoist refers to the amount of material conveyed per unit time. When conveying bulk materials, it is calculated based on the mass or volume of the materials conveyed per hour; when conveying into pieces, it is calculated by the number of pieces conveyed per hour. When matching with vibrating screen equipment such as linear vibrating screen, rotary vibrating screen, ultrasonic vibrating screen, etc., it is necessary to calculate the feed volume of the vibrating screen and control the conveying volume. The screw feeder motor can choose adjustable speed motor and ordinary motor to control the conveying speed and the conveying volume per hour. Whether to add a hopper at the feed inlet, and the size of the feed hopper.