Welcome to visit China Pengwei Machinery website
Flip Flow Screen
Square Swing Sieve
Plate Feeder

What are the requirements for the application of Yankuang screening machine in mines

The Yankuang screening machine can monitor the screening accuracy of the screen through the opening above the discharge port. The screen is broken and blocked. 9. The up and down movement of the small ball makes the screen not easy to block (the material that is easy to pass through the screen does not need to be used). The width of the screen surface of the linear screen must also be appropriate, and it must maintain a certain proportional relationship with the length of the screen surface. When the sieve load is equal, the width of the sieve is small and the length is large, and the material layer on the sieve surface is thick, and it is difficult for fine particles to approach the sieve surface and penetrate the sieve holes. On the contrary, when the width of the screen surface is large and the length is small, the thickness of the material layer is reduced, and the fine particles are easy to approach the screen surface. However, due to the short residence time of the particles on the screen surface, the chance of the material passing through the sieve holes is less, and the screening efficiency It will definitely decrease.

Yankuang screening machine's firm pressing screen frame makes the tension of the screen high. Materials are easier to pass through the net, and the net changer is easier and faster by using the net frame assembly, which shortens the downtime of assembly line production. You can freely choose between two ways when ordering. The longer the screen surface, the longer the material will be sieved on the sieve, and the higher the sieving accuracy. The relationship between screening time (or screen surface length) and screening efficiency. Later, most of the easy-to-sieving particles were sieved out, and some difficult-to-sieving particles remained. Although the time increased, not many were sieved by the linear sieve, and the screening efficiency was not increased much.

What are the requirements for the application of Yankuang screening machine in mines

The adjustment of the radial angle and the tangential angle of the Yankuang screening machine causes the material to move in an involute motion on the screen platform, which makes the material travel a relatively long way on the relative area and improves the screening accuracy. There are many factors that affect the efficiency of linear screens. In addition to the selection of the power of the vibration motor, the adjustment of the eccentric weight of the vibration motor and the characteristics of the material itself, the length and width of the linear screen also have a great influence on the screening process of the linear screen. Impact.
It is unreasonable for the screening time to be too long. Because when the inclination angle of the screen surface is constant, to increase the screening time, the only way to increase the length of the screen surface. Too long screen surface is not good, waste plant space, screen structure is bulky, screening efficiency is not improved much, so the screen length must be appropriate. In order to ensure a higher screening efficiency, it is sometimes advantageous to appropriately increase the length of the screen if the configuration conditions permit. Yankuang screening machine mainly depends on the width of the screen surface, and the screening accuracy mainly depends on the length of the screen surface.
Low operating and maintenance costs, reduced downtime, and further improved cost performance. Yankuang screening machine has a fully enclosed structure, which has lower noise than other models and is more suitable for environmental protection. 12. The German TuV international quality system certification guarantees the quality of the products. The material moves on the screen platform, and the material landing time is usually over 85%, which improves the screen passing rate and increases the output. 4. The low-speed and soft rock screening movement protects the prototype of the material, and is not easy to generate static electricity. It is the best choice for the screening of inflammable, explosive and easy to generate static electricity.