Welcome to visit China Pengwei Machinery website
Flip Flow Screen
Square Swing Sieve
Plate Feeder

Ways to increase the output of existing bucket elevators in coal and mines

Bucket elevators are used in many industries such as coal, mining, food, and chemical industries. In the process of using bucket elevators for material transportation, the problem we are most concerned about is output. However, some factors may affect the output of bucket elevators. The following editor will specifically talk about which factors will affect the increased output of bucket elevators?
  The proportion of material, particle size, viscosity, fluidity, etc. directly affect the selection of bucket elevator. These factors affect the filling factor, and thus the traction device and transmission device of the bucket elevator.

From this article, we can see that there are many factors that affect the increased output of the bucket elevator. In order to prevent the output of the bucket elevator from decreasing, we must pay attention to these problems, otherwise the bucket elevator is not easy to perform. Best performance. When we find that the output of the bucket elevator is low, we must pay attention to avoid discovering some problems, such as the failure rate of the bucket elevator.

Ways to increase the output of existing bucket elevators in coal and mines

  The physical characteristics of the material, the size of the bucket elevator hopper, the feeding method and the discharge port discharge method are the four main factors that affect the output of the bucket elevator.
The solution to the material leakage of the bucket elevator: After the transformation, during the operation of the bucket elevator, the particulate material effectively enters other process equipment through the blanking plate, the leakage phenomenon is greatly improved, the normal working capacity of the equipment is improved, and the cycle load is reduced , The current drops to the normal value, and the power consumption decreases. The hoist shell is also effectively protected, and the maintenance workload and maintenance cost are greatly reduced. Because the high-efficiency plate chain hoist (NE, NSE, TH, TD series) has similar unloading methods, this method can be used for improvement.
  The depth and size of the hopper of the bucket elevator will affect the increased output per unit time. If there is no special requirement, it is recommended to use a deep hopper to increase the increased output.