Welcome to visit China Pengwei Machinery website
Flip Flow Screen
Square Swing Sieve
Plate Feeder

The difference between bucket elevator and vertical vibration elevator

The difference between the bucket elevator and the vertical vibration elevator is mainly from the principle and purpose. The following is a brief introduction by Ao Chuang mechanical engineers:

The bucket elevator is suitable for lifting from a low place to a high place. After the supplied materials are put into the hopper through the vibrating table, the machine automatically runs continuously and upwards. The conveying speed can be adjusted according to the conveying volume, and the lifting height can be selected as required. The hopper is designed and manufactured by itself. The PP non-toxic hopper makes this type of bucket elevator more widely used. All sizes are designed and manufactured according to actual needs. The design of the machine and computer measuring machine is suitable for the lifting and feeding of food, medicine, chemical industry products, screws, nuts and other products. The automatic stop of the machine can be controlled by the signal recognition of the packaging machine.

The difference between bucket elevator and vertical vibration elevator

Bucket elevator is a continuous conveying machine that uses a series of hoppers evenly fixed to the endless traction member to lift materials vertically. It is divided into three types: ring chain, plate chain and belt.
Working principle: The hopper scoops the material from the storage below, lifts it to the top with the conveyor belt or chain, bypasses the top wheel and flips down, the bucket elevator pours the material into the receiving tank. The driving belt of the bucket elevator with belt drive generally adopts rubber belt, which is installed on the lower or upper transmission drum and the upper and lower reversing drum. Chain-driven bucket elevators are generally equipped with two parallel transmission chains, with a pair of transmission sprockets above or below, and a pair of redirecting sprockets below or above. Bucket elevators are generally equipped with organic shells to prevent the dust in the bucket elevators from flying.

The vertical vibration elevator is a new type of vertical vibration conveying equipment. This machine can convey all solid materials (less viscous) in the form of granules, lumps and powders. Widely used in the lifting of bulk, powder and short fiber solid materials in mining, metallurgy, machinery, building materials, chemicals, rubber, medicine, power, food, food and other industries. SC-type vibrating conveyors are lifting materials at the same time , Can also complete the drying and cooling of materials. Separate trough type and closed type structure, and according to different process requirements, we can design the screening elevator for the grading effect of material particles and the elevator for flammable and explosive materials.

The difference between bucket elevator and vertical vibration elevator

The driving device of the vertical vibration hoist is installed at the lower part of the conveying tower. The two vibrating motors are installed symmetrically and crosswise. The conveying tower consists of a pipe body and a spiral conveying groove welded around the pipe body. The vibration device consists of a base and a vibration isolation spring. When the vertical conveyor is working, according to the self-synchronization principle of the double vibration motor, the vibration motor generates an excitation force, forcing the entire conveying tower body to perform horizontal circular motion and upward vertical motion spatial composite vibration, and the material in the spiral groove is affected by the conveying groove The effect is to throw a circular motion at a constant speed and move upwards along the conveyor body to complete the upward (or downward) transportation of materials.