Welcome to visit China Pengwei Machinery website
Flip Flow Screen
Square Swing Sieve
Plate Feeder

Solutions to torsional vibration problems in disc vibrating screens

During the use of the disc vibrating screen, torsional vibration is one of the more common faults. Today we will talk about the reasons and solutions for the torsional vibration of the disc vibrating screen. Hope to help users.
There are many reasons for the torsional vibration failure of the disc vibrating screen. It may be that the direction of the exciting force generated by the vibration exciter of the disc vibrating screen is deflected and shifted. It may be that the spring damping system of the high-frequency vibrating screen and different parts are malfunctioning. It may also be that the disc vibrating screen equipment is not placed on a horizontal surface, and the screen surface cannot be kept level.

Solutions to torsional vibration problems in disc vibrating screens

How should it be solved?
Adjust the exciting force of the disc vibrating screen to make it reasonable. It should be noted that the included angles of the eccentric blocks at both ends of the vibration motor must be equal and biased to the same side of the vibration motor during each adjustment.
Check the rubber springs to ensure that there is no height difference between the springs. If there is, replace the damaged parts to solve it.
Perform a comprehensive balance check on the equipment of the disc vibrating screen and ensure that the screen surface is in a horizontal position.
Recalculate the hoisting angle of the disc vibrating screen to keep the hoisting force consistent.